AMI MUCWTPL208B Take Up Unit Bearings

B:45.00 mm; Basic Static Radial Load Rating Co:114000 N; d:75.000 mm; Sealed Speed Rating n3:2500 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; Fillet Radius ra:2.50 mm; D:190.0000 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:153000 N; Oil Speed Rating Open/Shielded

A1:149.225 mm; H:298.45 mm; P180°:81.4 kN; Mass pillow block:90.3 kg; h:52.388 mm; End plug (suffix Y):EPR 27; Cap bolt:4 x 3/4-10 UNC; J max.:434.975 mm; Cap bolt, SAE grade:8; RG:3/8 NPT;

Basic Dynamic Radial Load Rating C:85200 N; Basic Static Radial Load Rating Co:90000 N; Grease Speed Rating n1:4000 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4800 rpm; B:26.00 mm; Fillet Radius rb:1.00 mm; d:105.000 mm; D:160.0000 mm;

Grease Speed Rating n1:1100 rpm; Basic Dynamic Radial Load Rating C:904000 N; B:176.00 mm; Oil Speed Rating n2:1400 rpm; Fillet Radius rb:1.50 mm; Basic Static Radial Load Rating Co:1730000 N; Fillet Radius ra:4.00 mm; D:460.0000 mm; d:220.000 mm;

d:206.375 mm; Calculation factor Y0:1.3; D:282.575 mm; D1 ≈:254 mm; r1,2 min.:0.8 mm; Calculation factor Y2:2; Fatigue load limit Pu:305 kN; Mass bearing:36.5 kg; Thrust factor K:1.15; Basic dynamic load rating C:1300 kN;

r1,2 min.:1.5 mm; B:13.5 mm; D1:88 mm; Mass housing washer:1.27 kg; D:150 mm;

d1:68 mm; d:35 mm; Mass shaft washer:0.14 kg; B:7 mm; r1,2 min.:1 mm;

P120°:73.8 kN; P180°:84.5 kN; Cap bolt:2 x 1-8 UNC; Labyrinth ring:2 x LOR 115; H1:152.4 mm; Bearing:22226 EK; ba:57.944 mm; Max. speed for PosiTrac Plus seal:1300 r/min; J max.:406.4 mm; End plug (suffix Y):EPR 15;

Oil Speed Rating Open/Shielded n2:13000 rpm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:14000 N; Sealed Speed Rating n3:7500 rpm; Shielded or Sealed B1:12.7 mm; Fillet Radius ra:0.79 mm; Basic Static Radial Load Rating Co:9300 N; Grease Speed Rating Open/Shielded n1:11000 rpm; D:57.200

Basic Static Radial Load Rating Co:51000 N; Grease Speed Rating n1:4500 rpm; d:65.000 mm; B:23.00 mm; Oil Speed Rating n2:6000 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:63700 N; Fillet Radius ra:1.50 mm; D:120.0000 mm;

s max.:3 mm; Basic static load rating C0:71 kN; F:85 mm; Basic dynamic load rating C:58.3 kN; B:20 mm; r1,2 min.:1.1 mm; da max.:83 mm; D1 ≈:101 mm; Reference speed:7500 r/min; db min.:87 mm;

Mass lock washer:0.05 kg; d:65 mm; d2:92 mm; B:2.5 mm; f:8 mm; d1:79 mm; M:62.5 mm;

D:150.0000 mm; Fillet Radius ra:2.00 mm; d:85.000 mm; Basic Dynamic Radial Load Rating C:58500 N; Oil Speed Rating n2:4500 rpm; B:36.00 mm; Basic Static Radial Load Rating Co:23600 N; Grease Speed Rating n1:3800 rpm;

Lock nut:AN 36; d1:161.925 mm; B1:163.728 mm; Hydraulic nut:HMVC 36E; Threads per inch:8; Sleeve:S 136x6.3/8; d3 max.:230.327 mm; G:179.476 mm; B4:28.042 mm; Mass adapter sleeve assembly:10 kg;

Fillet Radius ra:2.50 mm; B:50.00 mm; Basic Static Radial Load Rating Co:72000 N; d:110.000 mm; Oil Speed Rating n2:3000 rpm; Basic Dynamic Radial Load Rating C:163000 N; Grease Speed Rating n1:2400 rpm; D:240.0000 mm;